Powder Coating Ovens
Infrared ovens from Vulcan
 

Oven Design Parameters Quote Form

Fill out form below for a quote
Please allow us to design and present a Pre-Gel or Full Cure Oven for your finishing process. Simply complete the short form and press the submit tab.
If you have questions please call John Martin 800 325 5422




Oven Design Parameter Form


1.Oven Purpose; Pre-Gel Full Cure

2.Height of overhead rail above floor level (A) Ft.

3.Part opening (part window) Width (B) Ft. Height (C) Ft.

4.Vertical Ht. of Part Opening Centerline, above floor level. (D) Ft

5.Part Type;
   Flat sheet Gauge Size; L W Ht
   Weldment Weight lbs. Size L W Ht
   Casting     Weight Lbs    Metal Type
   Tubular        Tube Type Size; L W Ht

6.Powder Type; Epoxy Polyester Hybrid
   Cure Schedule; No. of Mins. at degrees Fº or Cº

7.Liquid Type;
   Cure Schedule; No. of Mins. at degrees Fº or Cº

8.Intended line speed Ft. per Min.

   your email: (required)

comments:




Any questions call 800-325-5422 or 401-683-2070    e-mail us
Vulcan Catalytic Systems, Ltd. | PO Box 855, Portsmouth, RI 02871 | 401-683-2070 | Email: jmartin@vulcan-mdf.com